Non-Clog Submersible Pumps

These submersible pump is used for sewage and seepage application. These submersible pumps are single stage, single suction pumps. These submersible pump impellers are of non-clog type which allow smooth passage of solids and cater to wide range of applications. These pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with a rubber diaphragm to make it leak proof joint. 

SPECIFICATIONS :

• Delivery size up to 300 mm

• Capacity up to 1800 m3/hr

• Head up to 90 metres

• Max permissible solid size up to 300 mm

APPLICATIONS :

• Screened sewage

• Raw sewage

• Contaminated effluents

• Industrial waste water

• Storm water

• Trench and tunnel water

• Drain water, mine water, etc.

These submersible pump is used for sewage and seepage application. These submersible pumps are single stage pumps equipped with a non-clogging impeller, which allows smooth passage of solids, thus making them suitable for a wide range of applications.These pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with a pump connector unit and the connector unit is connected to the pump support bracket along with a rubber diaphragm to make it a leak-proof joint. 

SPECIFICATIONS :

• Delivery size up to 150 mm

• Capacity up to 300 m3/hr

• Head up to 50 metres

• Max permissible solid size up to 125 mm

APPLICATIONS :

• Contaminated effluents

• Industrial waste water

• Storm water

• Trench and tunnel water

• Drain water

• Saline water

• Drainage water

• Sewage water

Sewage de-watering submersible pumps come equipped with a pre-installed float switch that automatically starts and stops the pump based on water levels, ensuring effortless operation. Designed for convenience, these ready-to-use pumps require no additional installation.. simply place them in the tank and they’re good to go. 

SPECIFICATIONS:

•Head Range: Up to 70 metres

•Discharge Range: Up to 4800 LPM

•Power Ratings: 0.75 to 15 kW (1 to 20 HP)

•Voltage Range: 380 to 440 volts 3PH

•Insulation: B class / Protection: IP 68

•pH Value: 6.5 to 7.5

•Maximum Ambient: 40° C temp

•Maximum Density: ≤ to 1050 kg/m3

•Consistency of Medium: < 1.2 x 103 kg/m3

APPLICATIONS:

•Sewage Pumping

•Dewatering from Basements, Multi-storeys, Shopping Malls, Godowns, etc.

•Construction Site

•Dewatering Foundation, Trenches and Pits

•Flood Water Handling

These series submersible slurry pump is designed for continuous operation in tough, abrasive heavy industry applications. Operating directly in the slurries, no additional support superstructure Easy to install, less space, and reduces the installation costs…

SPECIFICATIONS:

Capacities: up to 2400 m³/h
Head: up to 80 m
Discharge: up to 16 inch
HP: up to 200kw

APPLICATIONS:

• Removal of sludge, slurry, and sediment from construction and mining sites

• Dewatering of sand, silt, and mud in excavation projects

• Handling industrial waste, ash, and slurry in power plants and processing units

• Cleaning settling tanks, lagoons, and pits

• Dredging operations in rivers, lakes, and reservoirs

• Pumping thick, viscous fluids in wastewater treatment plants