These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. These pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.

SPECIFICATIONS 

• Delivery size from 65 to 125 mm

• Capacity from 20 to 450 m3/hr

• Head up to 60 metres

• Working pressure up to 16 bar

• Temperature up to 90° C

APPLICATIONS 

• Water supply, hot water, drinking water

• Sprinkling and irrigation

• Air conditioning

• Industrial water

• Swimming pool water

• Firefighting

• Cooling water

• Condensate

• Clear juice 

These pumps are single stage, horizontal spindle volute type foot-mounted end suction pumps fitted with oil lubricated ball bearings and thrust bearing. These are low head and high capacity water pumps available with either horizontal or vertical delivery options. These water pumps are provided with semi-open type mixed flow impeller.These pumps are provided with enclosed type mixed flow impeller. 

SPECIFICATIONS 

• Delivery size from 200 mm to 650 mm (8 to 26)

• Capacity up to 7000 m3/hr (30,820 US gpm)

• Head up to 30 metres (90 ft.)

• Temperature 5° C to 140° C

APPLICATIONS 

• Air-conditioning

• Drainage

• Irrigation

• Storm water

These large pumps equip a back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of  large pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These  water pumps are either gland packed or mechanically sealed with robust cast iron casing and are highly efficient. Bronze impeller makes water pumps easy to maintain, reliable and long lasting. 

SPECIFICATIONS 

• Delivery size from 150 mm to 300 mm (6 to 12)

• Capacity up to 1900 m3/hr (8866 US gpm)

• Head up to 35 metres (112 ft)

• Temperature (-)10° C to 90° C

APPLICATIONS 

• Aqua culture

• Water supply

• Irrigation

• Sugar industries

These pumps are of back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of  pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DB water pumps are either gland packed or mechanically sealed. 

SPECIFICATIONS 

• Delivery size from 32 mm to 150 mm (11/4 to 6)

• Capacity up to 550 m3/hr. (2422 US gpm)

• Head up to 100 metres (320 ft.)

• Temperature (-) 10° C to 100° C

APPLICATIONS 

• Air-conditioning

• Booster service

• Circulation of water in industries

• Firefighting

• Lift irrigation

• Mine water

• Pumping brines, oils, etc. for liquids

• Sprinkler systems

These pumps are single stage pumps with a back-pull-out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of pumps is covered by four driving units thereby reducing inventory and achieving interchangeability of parts. These water pumps are either gland packed or mechanically sealed. 

SPECIFICATIONS 

• Delivery size up to 125 mm (5)

• Capacity up to 660 m3/hr (2906 US gpm)

• Head up to 100 metres (320 ft.)

• Temperature (-)10° C to 140° C

APPLICATIONS 

• Air conditioning

• Condensate water supply

• Firefighting and booster services

• In sprinkler systems for handling clear and turbid water up to 3000 ppm